Auto Parts Degreasing Machine

Fully constructed from stainless steel, double skinned and insulated, the Cleanmake Products L.L.C-multi stage front loading phosphate wash systems are compatible for use with all modern phosphate formulations with multiple process stages to include degreasing/phosphating and multiple rinse cycles (heated and re-circulated or sacrificial to drain). Ideal for batch processing, these units are operator friendly with easy to use control systems to set independent fluid tank temperatures and cycle times.

The component basket is rolled from the wash machine onto an external fixed, or mobile, platform for ease when loading and unloading the component parts.  Rotating spray bars, with spray jets to suit the application, are positioned above and below the component basket resistant electric immersion heaters and stainless steel wash pump are fitted as standard.

Standard Process Stages :

• Heated degrease/ phosphate wash stage (re-circulated), Primary mains water rinse stage (sacrificial)
• Heated mains or DI water final rinse stage with passivation (re-circulated).

Standard Features :

• 100% Stainless Steel Construction with 35mm Thick Thermal & Sound Insulation
• Heavy Duty Stainless Steel Component Basket – Standard Range 1500 x 1000 up to 5000 x 1000
• Bespoke Component Holding Jigs also available
• Air Powered Vertical Opening Door
• Fully Independent Fluid Tanks
• Low Fluid Level Protection
• Door Pressure Sensitive Safety Pad
• Digital Display Fluid Temperature Control
• Integral Fluid Filtration Network
• Electric, Gas or Steam Fired Fluid Heating
• External Fixed Load/Unload Platform or Wheel Mounted Trolley
• Pressed Stainless Steel Wash Pump
• Auto Fresh Water Refill
• Micro Processor or PLC Controlled

Optional Extras :

• Hot Wash, Rinse, Air Knife & Dry cycles to suit application
• Disc Type Oil Skimmer
• Fine Inline Fluid Particle Filtration
• Oil/Water Separator Units (Insoluble Oils)
• Steam Extraction Fan & Steam Condenser Units
• Auto Fresh Water Refill
• Operators Hand Held Spray Lance
• 7 Day/24 Hour Fluid Heater Timer
• Effluent Disposal Pump
• Auto Detergent Dosing Units (syphon or probe type)
• DI water plant
• Integral hot air drying stages
• Additional chemical/detergent process stages
• Standalone drying ovens
• Additional wheel mounted trolleys

Typical Applications :

• Metal Pre Treatment
• Used prior to powder coating or painting